Monday, April 19, 2021
Home Interior Design Commercial Common Types of Showers

Common Types of Showers

 

Inner West is an area located west of the central business district of Sydney, Australia. This area has a rolling hills topography with shallow valleys and four waterways. However, these waterways have drastically changed over the years, which have led Inner West residents to increase their efforts in water conservation. Most households in Inner West Sydney have showers installed on their bathrooms instead of a bathtub to save water. However, the efficiency of showers to save water will depend on the type of shower installed.

Replacing showers or repairing showers may seem a simple thing to do. However, there are a lot of things to consider when changing showers. A good plumber in Inner West will be able to determine what type of shower to install based on factors such as water flow and existing pipe fixtures. Different types of showers are also installed differently. Here are the major types of showers.

 

  • Electric Showers

An electric shower heats the water as you take a shower. When your home already has a steady supply of water, having an electric shower installed will enable you to take a hot water shower using electricity to heat the water. The advantage of an electric shower is that you will only consume electricity whenever you choose to shower with hot water. When you choose not to use the heating option of the electric shower, then it will not consume electricity.

 

When choosing to have an electric shower installed, it is best to purchase one with a built-in thermostat which will regulate the temperature of water within the range of your desired levels. When the desired temperatures are reached, the thermostat will instruct the heating system to shut down. Electric showers without a thermostat will continue to heat water until the water gets scalding hot.

 

  • Power Showers

Some homes may have bad piping which results in low water pressure. This low pressure is not good for showering. You can call in the services of a plumber in Inner West to have your water pipes reinstalled, but it will be a very costly undertaking. Fortunately, you can increase your water pressure by installing power showers that have built-in pumps that enhance water flow. There are power shower models that also can heat water.

 

  • Mixer Showers

Mixer showers also have the capabilities of power showers where they increase water pressure. With mixer showers, you can fully control how hot your shower water will be by combining the flow of cold and hot water. However, with mixer showers, you will need to have a combi-boiler or immersion heater installed to have an available supply of heated water. Also, they can be costly in the long run since you will need electricity or gas to run continuously to give you a ready supply of hot water.

 

  • Digital Showers

Digital showers are the latest shower innovation with computers that accurately combine hot and cold water to reach the desired water temperatures. The computer processor will also allow you to choose the pressure level of your water and save your settings, so you do not need to set it every time you shower.

 

Since showers can control the temperature of the water that is connected with your home’s electrical wiring or gas line, it is important to let a professional plumber in Inner West do the shower installation for you. Hiring a professional is the safest and most practical way to address any plumbing concerns, and it will save you a lot on future costs.

 

 

Avatar
Helen Harry
Helen Harry is a freelance writer and a GOT fan. Apart from writing Technologies, she likes to read & write fiction. More than anything, she loves to spend her time with her family, explaining technologies to the elders.

Leave a Reply

Must Read

Subscribe

Keep Reading